Ball Joint Spacers do not affect roll centre – Extenders do.
I explained how lowering a car can affect roll centre and what to do to resolve it in a lot…
I explained how lowering a car can affect roll centre and what to do to resolve it in a lot…
I hadn`t planned on doing Cadwell again this year but when I saw a day advertised that was going to…
When the event details were released I was unsure if I was going to bother doing BilsterBerg. It was a…
Even though I`d had a completely trouble free day at Cadwell last month I was still very apprehensive about 2…
When converting the standard 2.0 16V engine to run a Turbo they often `breathe` quite a bit of oil from…
Ringmeisters Prime. What`s all that about then ? I`ve done quite a few Destination Nurburgring events over the last several…
After the engine Strip and rebuild I recently carried out I wanted to get on track before going to the…
My Golf had zero engine issues on the last outing at DN in May. The wastegate broke as I`ve explained…
The Roll Centre of a vehicle has a large impact on handling but it`s something not many people fully understand.…
Inspecting the calipers after a trackday I noticed a small brake fluid weep from 2 pistons. They had been installed…
Preparation for the first Destination Nurburgring event of the year was pretty minimal. I fixed the wastegate arm after it…
The first Nürburgring trackday of the year was with Circuit Days and it would be fair to say I was…
Due to the track width and ride height changes I`d made over the years I was experiencing some bump-steer. What…
The design of the HiSpec calipers to give more wheel spoke clearance mean the pad retaining pins are bolts which…
Whilst the old seats and 6-point harnesses were OK, the seats were over 13 years old and the harnesses were…
Our Northloop `season opener` trackday had been planned since December and we had over 20 cars booked on the event.…
At the end of 2016 I had a weird intermittent electrical misfiring issue and I was 100% it was wiring…
At Silverstone last year I`d noticed an odd boost oscillation around 6,000rpm. Highlighted in Blue. After removing the actuator to…
I wanted to move the rear wing rearwards and up into the clearer airflow. Previous supports were 3mm Aluminium but…
The first trackday of 2017 and I was keen to get back on track. I`d done a lot of work…